Skip to content

Replace Network Acl Entry

ec2_replace_network_acl_entry R Documentation

Replaces an entry (rule) in a network ACL

Description

Replaces an entry (rule) in a network ACL. For more information, see Network ACLs in the Amazon VPC User Guide.

Usage

ec2_replace_network_acl_entry(CidrBlock, DryRun, Egress, IcmpTypeCode,
  Ipv6CidrBlock, NetworkAclId, PortRange, Protocol, RuleAction,
  RuleNumber)

Arguments

CidrBlock

The IPv4 network range to allow or deny, in CIDR notation (for example ⁠172.16.0.0/24⁠).

DryRun

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Egress

[required] Indicates whether to replace the egress rule.

Default: If no value is specified, we replace the ingress rule.

IcmpTypeCode

ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

Ipv6CidrBlock

The IPv6 network range to allow or deny, in CIDR notation (for example ⁠2001:bd8:1234:1a00::/64⁠).

NetworkAclId

[required] The ID of the ACL.

PortRange

TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

Protocol

[required] The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

RuleAction

[required] Indicates whether to allow or deny the traffic that matches the rule.

RuleNumber

[required] The rule number of the entry to replace.

Value

An empty list.

Request syntax

svc$replace_network_acl_entry(
  CidrBlock = "string",
  DryRun = TRUE|FALSE,
  Egress = TRUE|FALSE,
  IcmpTypeCode = list(
    Code = 123,
    Type = 123
  ),
  Ipv6CidrBlock = "string",
  NetworkAclId = "string",
  PortRange = list(
    From = 123,
    To = 123
  ),
  Protocol = "string",
  RuleAction = "allow"|"deny",
  RuleNumber = 123
)

Examples

## Not run: 
# This example replaces an entry for the specified network ACL. The new
# rule 100 allows ingress traffic from 203.0.113.12/24 on UDP port 53
# (DNS) into any associated subnet.
svc$replace_network_acl_entry(
  CidrBlock = "203.0.113.12/24",
  Egress = FALSE,
  NetworkAclId = "acl-5fb85d36",
  PortRange = list(
    From = 53L,
    To = 53L
  ),
  Protocol = "17",
  RuleAction = "allow",
  RuleNumber = 100L
)

## End(Not run)