Add Working Storage
storagegateway_add_working_storage | R Documentation |
Configures one or more gateway local disks as working storage for a gateway¶
Description¶
Configures one or more gateway local disks as working storage for a
gateway. This operation is only supported in the stored volume gateway
type. This operation is deprecated in cached volume API version
20120630. Use add_upload_buffer
instead.
Working storage is also referred to as upload buffer. You can also use
the add_upload_buffer
operation to add upload buffer to a stored
volume gateway.
In the request, you specify the gateway Amazon Resource Name (ARN) to which you want to add working storage, and one or more disk IDs that you want to configure as working storage.
Usage¶
Arguments¶
GatewayARN
[required]
DiskIds
[required] An array of strings that identify disks that are to be configured as working storage. Each string has a minimum length of 1 and maximum length of 300. You can get the disk IDs from the
list_local_disks
API.
Value¶
A list with the following syntax:
Request syntax¶
Examples¶
## Not run:
# Configures one or more gateway local disks as working storage for a
# gateway. (Working storage is also referred to as upload buffer.)
svc$add_working_storage(
DiskIds = list(
"pci-0000:03:00.0-scsi-0:0:0:0",
"pci-0000:03:00.0-scsi-0:0:1:0"
),
GatewayARN = "arn:aws:storagegateway:us-east-1:111122223333:gateway/sgw-12A3456B"
)
## End(Not run)