Skip to content

Run Task

ecs_run_task R Documentation

Starts a new task using the specified task definition

Description

Starts a new task using the specified task definition.

On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.

You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.

Alternatively, you can use start_task to use your own scheduler or place tasks manually on specific container instances.

Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.

You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.

The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.

To manage eventual consistency, you can do the following:

  • Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.

  • Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.

Usage

ecs_run_task(capacityProviderStrategy, cluster, count,
  enableECSManagedTags, enableExecuteCommand, group, launchType,
  networkConfiguration, overrides, placementConstraints,
  placementStrategy, platformVersion, propagateTags, referenceId,
  startedBy, tags, taskDefinition, clientToken, volumeConfigurations)

Arguments

capacityProviderStrategy

The capacity provider strategy to use for the task.

If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

A capacity provider strategy may contain a maximum of 6 capacity providers.

cluster

The short name or full Amazon Resource Name (ARN) of the cluster to run your task on. If you do not specify a cluster, the default cluster is assumed.

count

The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks for each call.

enableECSManagedTags

Specifies whether to use Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.

enableExecuteCommand

Determines whether to use the execute command functionality for the containers in this task. If true, this enables execute command functionality on all containers in the task.

If true, then the task definition must have a task role, or you must provide one as an override.

group

The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).

launchType

The infrastructure to run your standalone task on. For more information, see Amazon ECS launch types in the Amazon Elastic Container Service Developer Guide.

The FARGATE launch type runs your tasks on Fargate On-Demand infrastructure.

Fargate Spot infrastructure is available for use but a capacity provider strategy must be used. For more information, see Fargate capacity providers in the Amazon ECS Developer Guide.

The EC2 launch type runs your tasks on Amazon EC2 instances registered to your cluster.

The EXTERNAL launch type runs your tasks on your on-premises server or virtual machine (VM) capacity registered to your cluster.

A task can use either a launch type or a capacity provider strategy. If a launchType is specified, the capacityProviderStrategy parameter must be omitted.

When you use cluster auto scaling, you must specify capacityProviderStrategy and not launchType.

networkConfiguration

The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it isn't supported for other network modes. For more information, see Task networking in the Amazon Elastic Container Service Developer Guide.

overrides

A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that's specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.

A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.

placementConstraints

An array of placement constraint objects to use for the task. You can specify up to 10 constraints for each task (including constraints in the task definition and those specified at runtime).

placementStrategy

The placement strategy objects to use for the task. You can specify a maximum of 5 strategy rules for each task.

platformVersion

The platform version the task uses. A platform version is only specified for tasks hosted on Fargate. If one isn't specified, the LATEST platform version is used. For more information, see Fargate platform versions in the Amazon Elastic Container Service Developer Guide.

propagateTags

Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags aren't propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use thetag_resource API action.

An error will be received if you specify the SERVICE option when running a task.

referenceId

The reference ID to use for the task. The reference ID can have a maximum length of 1024 characters.

startedBy

An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a list_tasks call with the startedBy value. Up to 128 letters (uppercase and lowercase), numbers, hyphens (-), forward slash (/), and underscores (_) are allowed.

If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.

tags

The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.

The following basic restrictions apply to tags:

  • Maximum number of tags per resource - 50

  • For each resource, each tag key must be unique, and each tag key can have only one value.

  • Maximum key length - 128 Unicode characters in UTF-8

  • Maximum value length - 256 Unicode characters in UTF-8

  • If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.

  • Tag keys and values are case-sensitive.

  • Do not use ⁠aws:⁠, ⁠AWS:⁠, or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for Amazon Web Services use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.

taskDefinition

[required] The family and revision (family:revision) or full ARN of the task definition to run. If a revision isn't specified, the latest ACTIVE revision is used.

The full ARN value must match the value that you specified as the Resource of the principal's permissions policy.

When you specify a task definition, you must either specify a specific revision, or all revisions in the ARN.

To specify a specific revision, include the revision number in the ARN. For example, to specify revision 2, use arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:2.

To specify all revisions, use the wildcard (*) in the ARN. For example, to specify all revisions, use ⁠arn:aws:ecs:us-east-1:111122223333:task-definition/TaskFamilyName:*⁠.

For more information, see Policy Resources for Amazon ECS in the Amazon Elastic Container Service Developer Guide.

clientToken

An identifier that you provide to ensure the idempotency of the request. It must be unique and is case sensitive. Up to 64 characters are allowed. The valid characters are characters in the range of 33-126, inclusive. For more information, see Ensuring idempotency.

volumeConfigurations

The details of the volume that was configuredAtLaunch. You can configure the size, volumeType, IOPS, throughput, snapshot and encryption in in TaskManagedEBSVolumeConfiguration. The name of the volume must match the name from the task definition.

Value

A list with the following syntax:

list(
  tasks = list(
    list(
      attachments = list(
        list(
          id = "string",
          type = "string",
          status = "string",
          details = list(
            list(
              name = "string",
              value = "string"
            )
          )
        )
      ),
      attributes = list(
        list(
          name = "string",
          value = "string",
          targetType = "container-instance",
          targetId = "string"
        )
      ),
      availabilityZone = "string",
      capacityProviderName = "string",
      clusterArn = "string",
      connectivity = "CONNECTED"|"DISCONNECTED",
      connectivityAt = as.POSIXct(
        "2015-01-01"
      ),
      containerInstanceArn = "string",
      containers = list(
        list(
          containerArn = "string",
          taskArn = "string",
          name = "string",
          image = "string",
          imageDigest = "string",
          runtimeId = "string",
          lastStatus = "string",
          exitCode = 123,
          reason = "string",
          networkBindings = list(
            list(
              bindIP = "string",
              containerPort = 123,
              hostPort = 123,
              protocol = "tcp"|"udp",
              containerPortRange = "string",
              hostPortRange = "string"
            )
          ),
          networkInterfaces = list(
            list(
              attachmentId = "string",
              privateIpv4Address = "string",
              ipv6Address = "string"
            )
          ),
          healthStatus = "HEALTHY"|"UNHEALTHY"|"UNKNOWN",
          managedAgents = list(
            list(
              lastStartedAt = as.POSIXct(
                "2015-01-01"
              ),
              name = "ExecuteCommandAgent",
              reason = "string",
              lastStatus = "string"
            )
          ),
          cpu = "string",
          memory = "string",
          memoryReservation = "string",
          gpuIds = list(
            "string"
          )
        )
      ),
      cpu = "string",
      createdAt = as.POSIXct(
        "2015-01-01"
      ),
      desiredStatus = "string",
      enableExecuteCommand = TRUE|FALSE,
      executionStoppedAt = as.POSIXct(
        "2015-01-01"
      ),
      group = "string",
      healthStatus = "HEALTHY"|"UNHEALTHY"|"UNKNOWN",
      inferenceAccelerators = list(
        list(
          deviceName = "string",
          deviceType = "string"
        )
      ),
      lastStatus = "string",
      launchType = "EC2"|"FARGATE"|"EXTERNAL",
      memory = "string",
      overrides = list(
        containerOverrides = list(
          list(
            name = "string",
            command = list(
              "string"
            ),
            environment = list(
              list(
                name = "string",
                value = "string"
              )
            ),
            environmentFiles = list(
              list(
                value = "string",
                type = "s3"
              )
            ),
            cpu = 123,
            memory = 123,
            memoryReservation = 123,
            resourceRequirements = list(
              list(
                value = "string",
                type = "GPU"|"InferenceAccelerator"
              )
            )
          )
        ),
        cpu = "string",
        inferenceAcceleratorOverrides = list(
          list(
            deviceName = "string",
            deviceType = "string"
          )
        ),
        executionRoleArn = "string",
        memory = "string",
        taskRoleArn = "string",
        ephemeralStorage = list(
          sizeInGiB = 123
        )
      ),
      platformVersion = "string",
      platformFamily = "string",
      pullStartedAt = as.POSIXct(
        "2015-01-01"
      ),
      pullStoppedAt = as.POSIXct(
        "2015-01-01"
      ),
      startedAt = as.POSIXct(
        "2015-01-01"
      ),
      startedBy = "string",
      stopCode = "TaskFailedToStart"|"EssentialContainerExited"|"UserInitiated"|"ServiceSchedulerInitiated"|"SpotInterruption"|"TerminationNotice",
      stoppedAt = as.POSIXct(
        "2015-01-01"
      ),
      stoppedReason = "string",
      stoppingAt = as.POSIXct(
        "2015-01-01"
      ),
      tags = list(
        list(
          key = "string",
          value = "string"
        )
      ),
      taskArn = "string",
      taskDefinitionArn = "string",
      version = 123,
      ephemeralStorage = list(
        sizeInGiB = 123
      ),
      fargateEphemeralStorage = list(
        sizeInGiB = 123,
        kmsKeyId = "string"
      )
    )
  ),
  failures = list(
    list(
      arn = "string",
      reason = "string",
      detail = "string"
    )
  )
)

Request syntax

svc$run_task(
  capacityProviderStrategy = list(
    list(
      capacityProvider = "string",
      weight = 123,
      base = 123
    )
  ),
  cluster = "string",
  count = 123,
  enableECSManagedTags = TRUE|FALSE,
  enableExecuteCommand = TRUE|FALSE,
  group = "string",
  launchType = "EC2"|"FARGATE"|"EXTERNAL",
  networkConfiguration = list(
    awsvpcConfiguration = list(
      subnets = list(
        "string"
      ),
      securityGroups = list(
        "string"
      ),
      assignPublicIp = "ENABLED"|"DISABLED"
    )
  ),
  overrides = list(
    containerOverrides = list(
      list(
        name = "string",
        command = list(
          "string"
        ),
        environment = list(
          list(
            name = "string",
            value = "string"
          )
        ),
        environmentFiles = list(
          list(
            value = "string",
            type = "s3"
          )
        ),
        cpu = 123,
        memory = 123,
        memoryReservation = 123,
        resourceRequirements = list(
          list(
            value = "string",
            type = "GPU"|"InferenceAccelerator"
          )
        )
      )
    ),
    cpu = "string",
    inferenceAcceleratorOverrides = list(
      list(
        deviceName = "string",
        deviceType = "string"
      )
    ),
    executionRoleArn = "string",
    memory = "string",
    taskRoleArn = "string",
    ephemeralStorage = list(
      sizeInGiB = 123
    )
  ),
  placementConstraints = list(
    list(
      type = "distinctInstance"|"memberOf",
      expression = "string"
    )
  ),
  placementStrategy = list(
    list(
      type = "random"|"spread"|"binpack",
      field = "string"
    )
  ),
  platformVersion = "string",
  propagateTags = "TASK_DEFINITION"|"SERVICE"|"NONE",
  referenceId = "string",
  startedBy = "string",
  tags = list(
    list(
      key = "string",
      value = "string"
    )
  ),
  taskDefinition = "string",
  clientToken = "string",
  volumeConfigurations = list(
    list(
      name = "string",
      managedEBSVolume = list(
        encrypted = TRUE|FALSE,
        kmsKeyId = "string",
        volumeType = "string",
        sizeInGiB = 123,
        snapshotId = "string",
        iops = 123,
        throughput = 123,
        tagSpecifications = list(
          list(
            resourceType = "volume",
            tags = list(
              list(
                key = "string",
                value = "string"
              )
            ),
            propagateTags = "TASK_DEFINITION"|"SERVICE"|"NONE"
          )
        ),
        roleArn = "string",
        terminationPolicy = list(
          deleteOnTermination = TRUE|FALSE
        ),
        filesystemType = "ext3"|"ext4"|"xfs"
      )
    )
  )
)

Examples

## Not run: 
# This example runs the specified task definition on your default cluster.
svc$run_task(
  cluster = "default",
  taskDefinition = "sleep360:1"
)

## End(Not run)