Revoke Security Group Ingress

ec2_revoke_security_group_ingress

R Documentation

Removes the specified inbound (ingress) rules from a security group

Description

Removes the specified inbound (ingress) rules from a security group.

You can specify rules using either rule IDs or security group rule properties. If you use rule properties, the values that you specify (for example, ports) must match the existing rule's values exactly. Each rule has a protocol, from and to ports, and source (CIDR range, security group, or prefix list). For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. If the security group rule has a description, you do not need to specify the description to revoke the rule.

For a default VPC, if the values you specify do not match the existing rule's values, no error is returned, and the output describes the security group rules that were not revoked.

For a non-default VPC, if the values you specify do not match the existing rule's values, an InvalidPermission.NotFound client error is returned, and no rules are revoked.

Amazon Web Services recommends that you describe the security group to verify that the rules were removed.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

Usage

ec2_revoke_security_group_ingress(CidrIp, FromPort, GroupId, GroupName,
  IpPermissions, IpProtocol, SourceSecurityGroupName,
  SourceSecurityGroupOwnerId, ToPort, DryRun, SecurityGroupRuleIds)

Arguments

CidrIp

The CIDR IP address range. You can't specify this parameter when specifying a source security group.

FromPort

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

GroupId

The ID of the security group.

GroupName

[Default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

IpPermissions

The sets of IP permissions. You can't specify a source security group and a CIDR IP address range in the same set of permissions.

IpProtocol

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). Use -1 to specify all.

SourceSecurityGroupName

[Default VPC] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. The source security group must be in the same VPC. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

SourceSecurityGroupOwnerId

Not supported.

ToPort

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes).

DryRun

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

SecurityGroupRuleIds

The IDs of the security group rules.

Value

A list with the following syntax:

list(
  Return = TRUE|FALSE,
  UnknownIpPermissions = list(
    list(
      FromPort = 123,
      IpProtocol = "string",
      IpRanges = list(
        list(
          CidrIp = "string",
          Description = "string"
        )
      ),
      Ipv6Ranges = list(
        list(
          CidrIpv6 = "string",
          Description = "string"
        )
      ),
      PrefixListIds = list(
        list(
          Description = "string",
          PrefixListId = "string"
        )
      ),
      ToPort = 123,
      UserIdGroupPairs = list(
        list(
          Description = "string",
          GroupId = "string",
          GroupName = "string",
          PeeringStatus = "string",
          UserId = "string",
          VpcId = "string",
          VpcPeeringConnectionId = "string"
        )
      )
    )
  )
)

Request syntax

svc$revoke_security_group_ingress(
  CidrIp = "string",
  FromPort = 123,
  GroupId = "string",
  GroupName = "string",
  IpPermissions = list(
    list(
      FromPort = 123,
      IpProtocol = "string",
      IpRanges = list(
        list(
          CidrIp = "string",
          Description = "string"
        )
      ),
      Ipv6Ranges = list(
        list(
          CidrIpv6 = "string",
          Description = "string"
        )
      ),
      PrefixListIds = list(
        list(
          Description = "string",
          PrefixListId = "string"
        )
      ),
      ToPort = 123,
      UserIdGroupPairs = list(
        list(
          Description = "string",
          GroupId = "string",
          GroupName = "string",
          PeeringStatus = "string",
          UserId = "string",
          VpcId = "string",
          VpcPeeringConnectionId = "string"
        )
      )
    )
  ),
  IpProtocol = "string",
  SourceSecurityGroupName = "string",
  SourceSecurityGroupOwnerId = "string",
  ToPort = 123,
  DryRun = TRUE|FALSE,
  SecurityGroupRuleIds = list(
    "string"
  )
)